Marine & Shipboard Cable Manufacturer for Shipbuilding and Offshore
Shipboard power, control, instrumentation and offshore cable for shipyards, offshore EPC contractors and vessel operators. Constructions are built to the IEC 60092 series, with classification-society type approval available on request.
Marine cable range
Marine cable is a specification decision, not a commodity
ZMS Marine Cable is the marine and offshore division of ZMS Cable, which has supplied cable and wire to industrial buyers since 1995. This site is dedicated to shipboard and offshore cable: the constructions that carry power, control and signals through a vessel and its deck equipment.
- Power cable from 0.6/1kV to 26/35kV
- Screened control and instrumentation cable
- Offshore mud- and oil-resistant constructions
- LSZH options for passenger ships
Five marine cable families. One qualified source.
Select by voltage, signal type and service environment. Every range can be built to the project cable schedule.

Marine Power Cables
0.6/1kV to 26/35kV EPR and XLPE insulated shipboard power cable to IEC 60092-353 / 60092-354; 26/35kV is supplied to IEC 60502-2.
View range

Control & Instrumentation Cables
Screened and armoured control and instrumentation cable to IEC 60092-375 for engine room and bridge.
View range

Offshore & Marine Engineering Cables
Mud-, oil- and water-resistant offshore cable to IEC 60092-359 and NEK 606.
View range

Communication & Data Cables
Coaxial, telephone and data bus cable to IEC 60092-373 for radar and shipboard networks.
View range

Special Marine Cables
Shore power, cold ironing, reeling and towline cable built to the project cable schedule.
View range
Approval, construction and documentation, in that order.
A marine cable order is decided before the cable is made: by the class rule, the construction and the paperwork that travels with the drum.
Type approval
Constructions covered by classification-society type approval, with certificate copies supplied for project pre-qualification.
Construction control
Cross-section, core count, screen, armour and sheath confirmed against the cable schedule and approved drawings.
Full marine range
Power, control, instrumentation, communication, offshore and speciality cable from a single source.
Export delivery
Seaworthy drum packing, drum marking and documentation to the destination port.
Built for projects that cannot slip
Cable is a small part of a vessel budget and a large part of its reliability. Production and export are planned around the yard delivery programme.
Where our marine cable does the work.
Seven service environments, each with a different mix of voltage, interference, media exposure and mechanical risk.
Shipbuilding & Ship Repair
Cable schedules for bulk carriers, container vessels, tankers and offshore support vessels, from design review through to drum-marked delivery at the yard.
Offshore Drilling Platforms
Mud-, oil- and hydrocarbon-resistant constructions for drilling, production and processing decks in continuous offshore service.
Offshore Wind
Power, control and communication cable for turbines, installation vessels and operations and maintenance craft.
Ports & Shore Power
Cold-ironing and port-equipment cable for shore-to-ship supply and fixed port installations.
Cruise & Passenger Ships
LSZH constructions for accommodation blocks, public spaces and safety-critical circuits.
Navigation & Automation
Screened control and instrumentation cable for radar, bridge systems and integrated automation networks.
Port Machinery & Cranes
Heavy-duty flexible and reeling cable for harbour cranes, container handling and shipyard equipment.
From copper to finished drum
Conductor stranding, insulation, screening, armouring and sheathing are controlled in-house. Finished cable is inspected, length-marked and packed for export.
- In-house conductor and insulation
- Screen and armour verification
- Dimensional and electrical checks
- Export drum and marking options
Documentation that travels with the drum.
CE conformity and management-system certificates are available for the project file. Batch test reports are issued with each production run.
Practical notes for marine cable buyers.
Short guides on approval, sheath selection and installation, written for the people who sign the purchase order.

Marine Cable Classification Society Approvals Explained
What ABS, BV, DNV and LR type approval actually covers, how it is scoped to a construction, and when a certificate is required before the cable is ordered.

LSZH vs PVC Marine Cable: Sheath Selection for Passenger Ships
Smoke density, acid gas and the SOLAS zones that decide whether a halogen-free sheath is required, optional or unnecessary.

Shore Power and Cold Ironing: Cable Requirements for Port Electrification
Current rating, flexibility and UV exposure decide a shore connection cable. A practical specification checklist for port electrification projects.
Need a marine cable that fits the installation?
Send the vessel type, class society and cable schedule. We will recommend the construction and quote factory-direct.
Send your cable schedule
Send the vessel type, classification society, cable types, core sizes, total lengths and destination port. Our engineers reply within one business day with construction options, type-approval status and pricing.
We use the details you send only to prepare your quotation and to reply to your enquiry. They are not sold or shared for marketing. See our Privacy Policy for how we store and handle enquiry data.

CE Declaration of Conformity
ISO 14001 Environment
ISO 45001 Safety
ISO/IEC 17020 Inspection
ISO/IEC 17025 Testing